Register Latest Topics
 
 
 


Reply
  Author   Comment  
chingon501

Silver Member
Registered:
Posts: 148
 #1 
Starting the flush grill install on my Hohner Corona III R. photo 20151001_111931_zpsgavdd2te.jpg
chingon501

Silver Member
Registered:
Posts: 148
 #2 
Removed register buttons. photo 20151001_112312_zpscrkdyzwf.jpg
chingon501

Silver Member
Registered:
Posts: 148
 #3 
Removed register trim plate and rods. photo 20151001_113030_zpsipr75war.jpg]
chingon501

Silver Member
Registered:
Posts: 148
 #4 
Here are the register rods and the new smaller button that are going to be used. photo 20151001_114906_zpst3dbga14.jpg
chingon501

Silver Member
Registered:
Posts: 148
 #5 
Made new support for the grill and registers. photo 20151001_161345_zpslfc1v7fd.jpg
chingon501

Silver Member
Registered:
Posts: 148
 #6 
Did a mock up the buttons aren't connected and the grill to short. photo 20151001_165610_zps8cmxuig1.jpg
I got a strip of celluloid to cover the gap  photo 20151001_165555_zpsyi3p52gk.jpg
chingon501

Silver Member
Registered:
Posts: 148
 #7 
Finished
chingon501

Silver Member
Registered:
Posts: 148
 #8 
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Untitled Document
Reyes Accordions reserves the right to delete any posts, or ban any member without notice or warning. Opinions on any subject including products by forum members are strictly the views and opinions of members who participate freely on this forum and not the views or opinions of Reyes Accordions. Since this is a privately owned community, the owner will dictate in which direction it sees fit in managing, moderating, and the advertisement content of this forum.


All images, material and info on this site are
Copyright? 2011 Reyes Accordions All Rights Reserved