Register Latest Topics
 
 
 


Reply
  Author   Comment  
TaoTao

Avatar / Picture

Silver Member
Registered:
Posts: 278
 #1 
Does anybody know if these accordions are the same size as a Classic Corona? Reason being, I want to know if the bass side will fit a corona ll. Thanks.
TaoTao

Avatar / Picture

Silver Member
Registered:
Posts: 278
 #2 
In the Hohner Website, the Hohner Bravo 48 dimensions are 31x 18.5. The Corona is 31x19 (cm). Looks like it would fit. ??????? Anybody??????
jues1980

Registered:
Posts: 8
 #3 
I think you can´t interchange housing & bellow parts between the corona and nova, but maybe you can interchange the reed blocks, take off the reed blocks of the corona and put it in to the nova (to make a diatonic with 2 switches in treble side and 48 bass in left side ).

Any way, I must recommend ask about it to Hohner Expert personnel (Mr. Tim Schofield).

Best regards
ELTONTONICO

Avatar / Picture

Silver Member
Registered:
Posts: 297
 #4 
The Nova is bigger in that it's more bulky than a Corona. i haven't opened one, but i've slipped one on for size. Are you looking to swap parts between the two? The reed blocks may need some cutting but as far as the external body parts, not sure that they will fit. I've opened up my Hohner Piccolo before and the walls were a little thicker than a corona.  Hope this helps.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Untitled Document
Reyes Accordions reserves the right to delete any posts, or ban any member without notice or warning. Opinions on any subject including products by forum members are strictly the views and opinions of members who participate freely on this forum and not the views or opinions of Reyes Accordions. Since this is a privately owned community, the owner will dictate in which direction it sees fit in managing, moderating, and the advertisement content of this forum.


All images, material and info on this site are
Copyright? 2011 Reyes Accordions All Rights Reserved